Banner Logo
Banner Logo Image
Login Status  Login Status
Not logged in
Bally AS-2518-51 Electrolytic Capacitor Kit
Part Number BALLY-S51E-KIT
Bally AS-2518-51 Electrolytic Capacitor Kit

Electrolytic capacitor set for Bally AS-2518-51 Sound Board
Kit includes all new capacitors:

C5 and C13:
Original = Axial Electrolytic 1uF, 50 Volt
Kit = Axial Electrolytic 1uF, 50 Volt
GPE part number CEA-1uF-50V-RMD

C7:
Original = Axial Electrolytic 470uF, 6.3 Volt
Kit = Axial Electrolytic 470uF, 16 Volt or 470uF, 25 Volt
GPE part number CEA-470uF-16V-RMD or CEA-470uF-25V-RMD

C8:
Original = Axial Electrolytic 470uF, 16 Volt OR 220uF, 16Volt
(see notes below)
Kit = Axial Electrolytic 470uF, 16 Volt
GPE part number CEA-470uF-16V-RMD

C15:
Original = Axial Electrolytic 4700uF, 25 Volt
Kit = Axial Electrolytic 4700uF, 25 Volt
GPE part number CEA-4700uF-25V-RMD

Notes:
Bally used a simple 1st order high pass filter on their audio boards (C8). Early Bally -51 sound boards used 220uF axial caps but soon afterwards switched to 470uF axial caps. If C8 = 220uF then the filter allowed 90Hz and higher to speaker. If C8 = 470uF then the filter allowed 42Hz and higher to speaker. This increase in capacitance value allowed wider range of sound to be heard. Replace the existing C8 with the included 470uF capacitor. If your original capacitor was 220uF and there is too much bass after reworking the board then try changing the value back to 220uF.
Higher voltage rated capacitors are a good substitute for lower voltage rated devices.
Observe proper polarities when installing parts.
Improper installation can result in damage and/or injury.
Price: $3.25
Quantity: